Submitted by lgaillard1 on Thu, 02/22/2024 - 13:12
Keywords:
CARBON CAPTURE
FACILITIES SUSTAINABILITY AND SAFETY
Material Science Innovation for Accelerated, Sustainable and Safe Implementation of Carbon Capture and Storage
Project Leader:
DTU
INSA’s scientific leader:
Bernard NORMAND (MATEIS)
As the world fights to tackle climate change, securing affordable, net-zero energy stands out as a paramount engineering task for ensuring a future for our and next generations. Among the pivotal technologies necessary to direct energy systems toward sustainability and net-zero emissions is Carbon Capture and Storage (CCS). CCS comprises several technologies which involve capturing CO2 from major point sources, followed by compression and transportation to appropriate underground reservoirs for either sequestration or enhanced oil recovery.
INSA Challenge:
Energie pour un développement Durable
Partners:
INSA LYON - MATEIS
Norwegian University of Science and Technology
UNIV LEEDS
OIL AND GAS CORROSION
NPL MANAGEMENT
ALLEIMA TUBE
LEEDS AND BRADFORD BOILER COMPANY
INSTITUTT FOR ENERGITEKNIKK
WOOD GROUP UK
BAKER HUGHES ENERGY TRANSITION
TOTAL ENERGIES
SINTEF
EQUINOR ENERGY
SCHLUMBERGER CAMBRIDGE RESEARCH
SHELL GLOBAL SOLUTIONS INTERNATIONAL
Funding Institution:
COMMISSION EUROPEENE
Dates - Duration:
2024-02-01 00:00:00 to 2028-01-01 00:00:00
Funding:
2929384
Contact:
bernard.normand@insa-lyon.fr
Chapo:
MISSION-CCS project targets the development of a unique, material science-based, integrated approach to a comprehensive understanding of materials and solvent degradation mechanisms for each processing step in the field of carbon capture and storage.
Submitted by lgaillard1 on Mon, 01/09/2023 - 17:47
Keywords:
ANNULOPLASTY
INTRA CARDIAC ULTRASOUND
Intra Cardiac Echography integration in Landing an Annuloplasty Device for transcatheter Mitral Valve Repair
Project Leader:
HCL
INSA’s scientific leader:
Benyebka BOU-SAÏD
The objective of the RHU ICELAND is to develop a new solution for annuloplasty of the mitral valve by transfemoral approach integrating an Intra Cardiac Ultrasound. Such a solution can be performed while the heart is beating, without cardiopulmonary bypass, thus providing a first-stage mitral valve repair solution for patients considered high risk who are not eligible for open surgery, and further for most patients requiring mitral valve repair. .
INSA Challenge:
Santé Globale et Bioingénierie
Partners:
INSA LYON - LAMCOS
INSA LYON - MATEIS
UCBL
CNRS
CENTRALE LYON
SORBONNE UNIVERSITE
CMINOV
CHU ST-ETIENNE
Funding Institution:
PIA ANR
Dates - Duration:
2022-06-01 00:00:00 to 2027-06-01 00:00:00
Funding:
5529116
Contact:
benyebka.bou-said@insa-lyon.fr
Chapo:
A synergic innovation program made of multidisciplinary internationally recognized research labs
Submitted by Samia Sbaa on Mon, 11/29/2021 - 10:03
Keywords:
CORROSION SCIENCE
SURFACE ENGINEERING
Development of new materials for bipolar plates dedicated to hydrogen electromobility
Project Leader:
SYMBIO
INSA’s scientific leader:
Bernard NORMAND
The introduction of fuel cells for surface vehicles requires a review of stack concepts to make them lighter, more compact and more durable. These objectives require, among other things, the development of new materials dedicated to the bipolar plate. The MATEIS (Materials: Engineering and Science) laboratory has been asked to work on the conceptualisation and performance evaluation of these new materials. To do this, it is using its expertise in surface engineering, corrosion science and electrochemical measurement.
Submitted by Samia Sbaa on Wed, 11/25/2020 - 16:41
Keywords:
BIOVERRES
IMPLANTS
Project Leader:
NORAKER
INSA’s scientific leader:
Jérôme CHEVALIER
Le projet REBOOT 3D développe des implants en composites Bioverre-PLA réalisés par fabrication additive pour la chirurgie du rachis afin d'offrir une guérison complète aux patients souffrant d’une hernie discale, de pathologies dégénératives et d’instabilités du rachis post-traumatiques.
Submitted by Samia Sbaa on Fri, 10/09/2020 - 15:46
Keywords:
ESSAIS IN SITU
TOMOGRAPHIE X
Double Tomographe à Haute Energie
Project Leader:
INSA LYON
INSA’s scientific leader:
Eric MAIRE - Joël LACHAMBRE
Un tomographe unique au monde, constitué de deux lignes de tomographie identiques à haute énergie croisées pour une acquisition simultanée de deux scans tomographiques.
Submitted by lgaillard1 on Sat, 05/02/2020 - 11:46
MANUTECH Ingénierie Lumière-Surfaces Santé & Société
Project Leader:
UJM - LHC
L'École Universitaire de Recherche MANUTECH SLEIGHT (Surfaces Light EngineerinG Health and SocieTy) ou MANUTECH SLEIGHT Graduate School, coordonnée par l'Université de Lyon et gérée par l'Université Jean Monnet à Saint-Etienne, propose un programme international intégré Formation (niveau Master et Doctorat) / Recherche dans le domaine de l'Ingénierie Lumière-Surfaces.
Ce programme interdisciplinaire mis en œuvre sur 10 ans a pour ambitions de :
INSA Challenge:
Transport : Structures, Infrastructures et Mobilités
Submitted by Anonyme (not verified) on Thu, 11/22/2018 - 15:55
Piping sYstem, Risk management based on wAll thinning MonItoring and preDiction
Project Leader:
INSA LYON - LVA
INSA’s scientific leader:
Philippe GUY (LVA)
The PYRAMID project is an International Collaborative Research Project (PRCI), which brings together French public laboratories (MATEIS and LVA at INSA Lyon, and CEA), an International Joint Unit (ELyTMaX), Japanese public laboratories (IFS, and GSE at Tohoku University, GSST at Gunma University), and the Nuclear Technology Research Laboratory at CRIEPI a non profit research foundation, supported by the electrical japanese industries.
Français
